|
Option Pneumatic
pressure bar clamps for sliding table 1900mm-3700mm
Particularly suitable for thin planks, veneers, etc; 60mm stroke,
pressure applied 1500N; max. 1560-3360mm cutting length with
cross cut fence; can be extended to 1410-3210mm.
The pneumatic pressure
bar can be used in various ways. For example to press a large workpiece
safely onto the sliding table. The device can also be used to simulate
a veneer saw. Being clamped safely and reliably, wavy plywood or
chipboards can be cut perfectly, and plastic or NF metal sheets can
be cut with reduced risk. Mitre cuts - also in combination with the
multi-purpose table T7458 - yield perfect results if the workpiece
lies totally flat on the sliding table. Another useful aid is the
motorized sliding-table T7471. The continuous feed rate ensures perfect
processing of even the most difficult material. Of course, every
cross-cut fence and every cross cut table can be combined with the
pneumatic pressure bar. The clamping bar can also be retrofitted. |
|
|
T74
Classic
