|
Option Multi-purpose
table with roller supports
1500 x 1600mm plated frame table, 2 rollers, 2 rip
fences adjustable according to the digital display via hand wheel,
cutting width 0-2100mm, fully recessed stops, ability to
use all versions of manually adjustable cross cut fences, and roller
support leg for heavy workpieces (rail to be fitted by customer).
The
multi-purpose table is ideal for parallel cutting of large panels
as well as for cutting smaller stripes. A hand wheel allows you to
move two stops concurrently and parallel to each other. The workpiece
on the edging table is positioned precisely and moved along the saw
blade. Using this process, damage to sensitive edges and the board
surface is virtually impossible. Simply lift or lower the stops to
set a cutting range for the stops. Panels with a width of up to 2100mm
can be processed easily and accurately in this way. Lowering the
stops entirely under the table level, allows you to freely move even
very large panels over the table. Apart from the precise adjustment
of measurements, the LCD display for the cutting width also enables
the incremental movement of the stops. Even cuts to the right side
of the saw blade are precise, as the saw-blade thickness is always
taken into account. With the optional roller support, the multi-purpose
table is also suitable for heavy workpieces.
|
|
|
T74
Classic
