|
Option Digital
cross cut fence with 2 point
contact and 2 stop elements
2 separate displays for inner and outer stop elements; micro-adjustment
for inner stop element; 1st stop extends to 200-2010mm, 2nd stop
extends to 3400mm.
By default, all T74 machines are equipped with the praxis proven
Martin 2-point cross-cut fence, allowing the workpiece to be aligned
at two points. In this way, even boards with slightly concave edges
due to internal tension can be cut precisely. The magnifying glass,
the clear scale, and the standard fine adjustment of the inner stop
element enable you to set cutting lengths from 200 to 1975mm
fast and very precisely. The quick clamp allows you to change rapidly
between dimensions; the extensible stop supports cutting lengths
of up to 3300mm. If you to prefer to work with a digital
read-out, the digital cross-cut fence T7440 is the right choice for
you: the inner stop and the outer stop use separate measuring devices
and can be set independently from each other with an accuracy of
a tenth of a millimetre. Every read-out can be switched to relative
measurement display, e.g. for quickly handling incremental cuts.
|
|
|
T74
Classic
