Martin Machinery - experience perfection

T26 T26 DUOCONTROL T26 CNC

Motors

Safety

Table & fence systems

Arbors & arbor systems

Additional accessories

Operator training

The Martin range can be customised to suit your requirements.

Whatever your trade, there are various options that can be added to the standard machines that will greatly improve your day-to-day workflow and efficiency.

Please do not hesitate to contact us directly to discuss your requirements in detail or for further advice.

Option: T2639_30 / T2639_50 - click for details


For T26 \| T26 DuoControl \| T26 CNC Infinitely variable speed with motor 7.5kW (10HP) option: T2603 Infinitely variable speed with motor 9.5kW (10HP) option: T2603/1 (from 1000-12000rpm. The infinitely variable speed regulation of the arbor enables the ideal adaptation of the tool’s speed to the demands of its task. Thanks to the large range of speed regulation, apart from profile grinding tools running at very low speed, also tools which run at very high speed can be used at an ideal cutting speed. The 7.5 kW standard motor always supplies the required power. If the machine is exposed to extreme strain, it can also be equipped with a 9.5 kW motor) Special voltage range extra charge option: T20P01 (210 - 240 Volt 50 Hz / 210 - 240 Volt 60 Hz / 440 - 480 Volt 60 Hz) Motor 7.5/9.5kW (10/13HP) 400V, 50cps with neutral wire extra charge option: T20P02


For T26 \| T26 DuoControl \| T26 CNC CENTREX guard option: T2600 more details KOALA guard for working at ring fence option: T2637 (with extractor duct 120mm Ø for spindle diameter 30-50mm Ø. Extra charge for subsequent delivery instead of guard FRS95. Use with T2605 is recommended) Bowmould Master option: T2638 more details Ring fences for Bowmould Master option: T2639_30 / T2639_50 more details


For T26 Fence with electronical reset counter option: T2626A more details Fence with digital readout option: T2627 more details For T26 \| T26 DuoControl \| T26 CNC Extendable support option: T2620 more details Table extension on both sides option: T2621 more details Table extension on the right and extendable support option: T2622 (length approx. 2100mm, extensible to 700mm to the front for machine with sliding table. With emergency button) Safety stop for cut-in working option: T2625 more details Anodised guide arms option: T2628 more details Integral fence with filling bar option: T2629 more details Swinging support for fence option: T2635 more details


For T26 \| T26 DuoControl \| T26 CNC Cutter arbor SK 40, 30mm ø option: T2650 (usable length 140mm. Up to 200mm tool ø) Cutter arbor SK 40, ¼" ø option: T2650.01 (usable length 140mm. Up to 200mm tool ø) Cutter arbor SK 40, 40mm ø option: T2652 (usable length 160mm. Up to 200-250mm tool ø) Cutter arbor SK 40, 40mm ø option: T2652.01 (usable length 200mm) Cutter arbor SK 40, ¼" ø option: T2654 (usable length 140mm. Up to 200mm tool ø) Cutter arbor SK 40, ½" ø option: T2654.01 (usable length 160mm. Over 200mm tool ø) Cutter arbor with spring chuck exchangeable option: T2655 more details Spring chuck for cutter arbor T2655 option: T2656 more details Quick cutter change system option: T2660 more details Cutter arbor quick change SK 40, 30 mm ø option: T2665 (usable length 140mm, for quick cutter change system T2660) Cutter arbor quick change SK 40, 40 mm ø option: T2666 (usable length 160mm, for quick cutter change system T2660) Cutter arbor quick change SK 40, ¼" ø option: T2668 (usable length 140mm, for quick cutter change system T2660) Cutter arbor tool identification SK 40, ¼" ø option: T2668/1 (usable length 140mm, with data chip for tool identification for tool identification system T2607) Cutter arbor quick change SK 40, ½" ø option: T2668.01 (usable length 160mm, for quick cutter change system T2660) Cutter arbor tool identification SK 40, ½" ø option: T2668.01/1 (usable length 160mm, with data chip for tool identification for tool identification system T2607) For T26 CNC Cutter arbor SK 40, 30 mm ø option: T2665/1 (usable length 140mm, with data chip for tool identification for quick cutter change system T2660) Cutter arbor SK 40, 40 mm ø option: T2666/1 (usable length 160mm, with data chip for tool identification for quick cutter change system T2660)


For T26 Rotatable control desk option: T2601 more details For T26 CNC Electrically adjustable table opening option: T2605/2 more details Tool identification system option: T2607 more details Interface RS 232 with software option: T2609 (Windows 95/98/NT - for direct PC access and for program and data administration [backup]). For T26 \| T26 DuoControl Electrically adjustable table opening option: T2605 more details For T26 \| T26 DuoControl \| T26 CNC Calibration unit option: T2604 more details Swinging support for feed unit option: T2640 (for machines without control desk T2601) Swinging support for feed unit option: T2641 more details Console for feed unit option: T2645 (recommended if a feed support is to be mounted on the left side of the fence. Note: not possible with sliding table T2680) Sliding table option: T2680 more details Enlargement of length stop option: T2681 (enlargement of length stop LAS up to 2700mm) Multiple stop option: T2682 (for length stop LAS) Mortising stop option: T2683 more details

For T26 \| T26 DuoControl \| T26 CNC Operator training option: T26S (professional training - contact us for more details)