Martin Machinery - experience perfection

T20 T20 DUOCONTROL

Motors

Safety

Table & fence systems

Arbors & arbor systems

Additional accessories

Operator training

The Martin range can be customised to suit your requirements.

Whatever your trade, there are various options that can be added to the standard machines that will greatly improve your day-to-day workflow and efficiency.

Please do not hesitate to contact us directly to discuss your requirements in detail or for further advice.

Option: T2039_30 / T2039_50 - click for details


For T20 \| T20 DuoControl Infinitely variable speed with motor 7.5kW (10HP) option: T2003 Infinitely variable speed with motor 9.5kW (10HP) option: T2003/1 (from 1000-12000rpm. The infinitely variable speed regulation of the arbor enables the ideal adaptation of the tool’s speed to the demands of its task. Thanks to the large range of speed regulation, apart from profile grinding tools running at very low speed, also tools which run at very high speed can be used at an ideal cutting speed. The 7.5kW standard motor always supplies the required power. If the machine is exposed to extreme strain, it can also be equipped with a 9.5kW motor) Special voltage range extra charge option: T20P01 (210 - 240 Volt 50 Hz / 210 - 240 Volt 60 Hz / 440 - 480 Volt 60 Hz) Motor 7.5/9.5kW (10/13HP) 400V, 50cps with neutral wire extra charge option: T20P02


For T20 \| T20 DuoControl CENTREX guard option: T2000 more details KOALA guard for working at ring fence option: T2037 (with extractor duct 120mm Ø for spindle diameter 30-50mm Ø. Extra charge for subsequent delivery instead of guard FRS95. Use with T2005 is recommended) Bowmould Master option: T2038 more details Ring fences for Bowmould Master option: T2039_30 / T2039_50 more details


For T20 Fence with electronical reset counter option: T2026A more details Fence with digital readout option: T2027 more details For T20 \| T20 DuoControl Extendable support option: T2020 more details Table extension on both sides option: T2021 more details Table extension on the right option: T2022 (length approx. 2100mm, extensible to 700mm to the front for machine with sliding table T2080. With emergency button) Safety stop for cut-in working option: T2025 more details Anodised guide arms option: T2028 more details Integral fence with filling bar option: T2029 more details Swinging support for fence option: T2035 more details


For T20 \| T20 DuoControl Cutter arbor SK 40, 30mm ø option: T2050 (usable length 140mm. Up to 200mm tool ø) Cutter arbor SK 40, 32mm ø option: T2050.01 (usable length 140mm. Up to 200mm tool ø) Cutter arbor SK 40, 40mm ø option: T2052 (usable length 160mm. Over 200-250mm tool ø) Cutter arbor SK 40, 40mm ø option: T2052.01 (usable length 200mm) Cutter arbor SK 40, 1 ¼" ø option: T2054 (usable length 140mm. Up to 200mm tool ø) Cutter arbor SK 40, 1 ½" ø option: T2054.01 (usable length 160mm. Over 200mm tool ø) Cutter arbor with spring chuck exchangeable option: T2055 (for shank ø 3 up to 25mm, for shank-type cutter (spring collet T2056 has to be ordered additionally, according the requested diameter, not possible with quick cutter change system T2060). If you would like to work also with router bits, like e.g. shank-type cutter, the cutter arbor with spring chuck is the ideal solution for your shaper. The spring chucks are easy to change and can be supplied for cutter shafts with a diameter of 3-25mm. This guarantees a maximum versatility of the arbor. In combination with small tool diameters, we recommend the infinitely variable speed T2003) Spring chuck for cutter arbor T2055 option: T2056 (diameter possible from 3 up to 25mm) Quick cutter change system option: T2060 more details Cutter arbor quick change SK 40, 30 mm ø option: T2065 (usable length 140 mm, for quick cutter change system T2060) Cutter arbor quick change SK 40, 40 mm ø option: T2066 (usable length 160 mm, for quick cutter change system T2060) Cutter arbor quick change SK 40, 1 ¼" ø option: T2068 (usable length 140 mm, for quick cutter change system T2060) Cutter arbor quick change SK 40, 1 ½" ø option: T2068.01 (usable length 160 mm, for quick cutter change system T2060)


For T20 Rotatable control desk option: T2001 more details For T20 DuoControl Alternating spindle option: T2006 more details For T20 \| T20 DuoControl Calibration unit option: T2004 more details Electrically adjustable table opening option: T2005 more details Swinging support for feed unit option: T2040 (for machines without control desk T2001) Swinging support for feed unit option: T2041 more details Console for feed unit option: T2045 (recommended if a feed support is to be mounted on the left side of the fence. Note: not possible with sliding table T2080) Sliding table option: T2080 more details Enlargement of length stop option: T2081 (enlargement of length stop LAS up to 2700mm) Multiple stop option: T2082 (for length stop LAS) Mortising stop option: T2083 more details For T20 \| T20 DuoControl Operator training option: T20S (professional training - contact us for more details)