State-of-the-Art Electronics
Even with the standard equipment, the Automatic model supports you with three controlled axes for the cutting height, angle, and width; optionally, a motorised cross-cut fence can be added as the fourth axis. If you go for the mitre-cutting system "Control" with its electronically controlled cross-cut fence and bus-connected mitre cross-cut table, you can even perform diagonal and compound mitre cuts with full electronic support.
     T74 Customisation

Easy Handling Even for Complex Tasks
The data of up to 100 tools and 1000 cutting settings can be stored in the clearly structured, user-friendly control (up to 7000 individual values). The touchscreen control only shows the "buttons" and displays needed for the respective situation. The menu leading the user through the work processes, providing comprehensive operator guidance for complex tasks.

Tool Conversion Ensures Speed and Accuracy
When changing the main saw blade, all you have to do is register it with its nickname. The tool conversion immediately computes important information such as the diameter, body thickness, and kerf width of the blade. The blade geometry is calculated continuously, thus enabling precise cuts even when the saw blade is tilted.

Easy Length Compensation
On the T74 Classic and Automatic, the optional angle-cutting system "RadioCompens" reduces the set-up times for angle cuts by more than 80%. You merely need to set the mitre cross-cut table that is connected to the control over a bus line to the desired cutting angle – the radio-controlled electronics do everything else for you. This system fully integrates the table angle in the control as the fifth axis. This technology always lets the correctly calculated measurement appear in both displays of the digital length stop included in the package.

Control with Built-in Future Proofness
Starting with the control and drive components of the T74, we consistently make use of modern industry standards that are subject to ongoing development and make the machine future-proof. This includes the vendor-independent CoDeSys programming system, the powerful CANopen bus system for the drive control, the USB interface, the stable Linux operating system, and the touchscreen with standard PowerPC processor.

Pressure-Sensitive Touchscreen Control
Simply enter the required measurements for the cutting width, height, and angle – the control unit will then accurately position the selected axis. Moreover, intuitive menus provide step by step assistance for complex processes while the integrated calculator can be used for required calculations.

The T74 Automatic features a 264mm touchscreen control with a brilliant colour resolution and can optionally drive a controlled cross-cut fence (fourth axis). Up to 1000 cutting settings with 7000 individual values for 100 main saw blades can be stored.

Rip Fence
Even with high workloads, the highly precise, lowerable rip fence with wear-free grooved ball-bearing guide ensures precise light-action operation and a high level of angle precision over the entire cutting width. Moreover, the rip fence smoothly glides over the table, unaffected by dust and chips.

Cross-Cut Fence
The most prominent characteristics of the highly precise two-point cross-cut fence with large profile cross-section are the smooth motion of the ball-bearing-supported fence carriage and the standard fine adjustment of the stop element, which ensure accurate measurements. On request, the cross-cut fence is also available with mitre cuts.

RadioCompens System
For precise diagonal cuts, the cross-cut fence requires length compensation, which is automatically taken care of by the RadioCompens system. By way of the bus line, the mitre cross-cut table transmits the angle information to the control, which sends the calculated compensation measurement to the cross-cut fence displays, in which the respective cutting measurements appear immediately.

Sliding Table
The T74 makes use of an advanced form of the proven, highly precise Martin sliding-table guide system. Table lips damaged by large, deviating saw blades can be replaced quickly and easily.