Modern Touchscreen
Every T60 is equipped with an intuitive touch screen control
providing step-by-step operator guidance through complex work
processes. By entering the measurements, the cutting height
and angle can be adjusted precisely in no time.
High-Quality Mechanical Design
On all T60 models, important mechanical components such as
the sliding table, the crosscut fence, and the rip fence
are made of high-quality material and are very durable.
The rip fence runs on a bearing to give smooth operation
set manually by the scale on the T60 basic but on the T60
classic the cutting width can be adjusted with a handwheel
from the operators normal working position using the digital
display on the integrated control panel. The sliding table
is designed as you would expect from a Martin machine:
with a replaceable table lip and stable, highly-ribbed
hollow-chamber profiles. The crosscut fence features smooth
operation of the fence carriage and standard fine adjustment
of the length stops – vital
for precise cuts.
The standard equipment of the T60 Classic comprises a protective
hood for saw blades with a diameter of up to 400mm.
The T60 Basic supports a maximum blade diameter of 315mm
and has a blade guard at the riving knife. The Basic model
enables cutting heights of up to 80mm, the
T60 Classic allows you to cut material of a thickness of
up to 130mm.
The saw blade of the T60 Basic is powered by a 4kW (5.5HP)
motor with 5000rpm. The T60 Classic motor offers three speeds
and a 5.5kW (7.5HP) power. Another difference between the
two machines is the cutting-width adjustment: on the T60 Basic,
the cutting width is set manually by means of a scale; on
the T60 Classic, this can easily be done by means of
a hand wheel from the operator position, using the digital
display integrated in the control.
Customisation
Both machines
can be equipped with an optional scoring unit whose scoring
height and position can easily be set while the machine
is running.
 T60
Customisation |
